AIRCON INSTALLATION

Proper installation of an air conditioner is critical to its efficiency. Each unit comes with a list of requirements that the installer must follow when installing it. Even a minor mistake in positioning a component can have a negative consequence on the system as a whole. We provide top-quality aircon installation in Singapore.

If you live in a region with warm tropical climates, you have the right to demand a high-performing unit.

PICK THE PERFECT AIRCON INSTALLATION IN SINGAPORE

When installing a split AC, you must find a sturdy wall that may easily accommodate the outdoor and indoor components. Even if the outdoor unit is mounted on another wall, choosing a sturdy wall can reduce the structure’s walls’ vibrations.

Additionally, make sure that there is a gap of at least fifteen centimetres above and on the AC unit’s side. Try to place it as far away from the ground as possible if possible.

    Best aircon service in Singapore

    1. AIRCON INSTALLATION IN SINGAPORE:FIX YOUR MOUNTING PLATE AND DRILL AN OUTLET HOLE

    Make sure the mounting plate is positioned horizontally against the wall at the location where the unit will be installed indoors. You can use a spirit level or measuring tape to ensure this.Drill the holes where the wire and pipe will connect with the outdoor unit to be installed.

    2. MOUNTING YOUR INDOOR AC UNIT

    Make sure you send out two copper pipes and a wire through the holes you drilled earlier before gently removing the cover at the front of the AC. You will also need to send out a drainage pipe.

    Once you’ve done that, lift the AC mounting plate towards the copper pipes in order to remove the cover.

    3. CHOOSING A GREAT AIRCON INSTALLATION IN SINGAPORE

    To get the best performance from your outdoor unit, you need to make sure that there is a distance of at least thirty centimeters around it. You should not pick a location that receives a lot of sunlight or is very dusty.

    4. FIXING YOUR BRACKETS

    The holes should be horizontally aligned when installing the brackets. Use fasteners that are sent with the product to connect your brackets.

    5. MOUNTING THE OUTDOOR UNIT

    When you want to place an outdoor unit of your air conditioner on the same bracket, you should lift it slowly and place it on the bracket. You should also screw in the bracket. Next, bolt the air conditioner unit up using the brackets.

    6. CONNECTING YOUR WIRES

    Go ahead and remove the cover from your electrical ports. Check the connection diagram that came with your air conditioning unit to see where you’ll need to connect the power cord. Connect the power cord to the external air conditioner in accordance with the manufacturer’s instructions to avoid damaging the unit.

    7. CONNECTING THE COPPER WIRES

    Use a vacuum pump to connect the copper wires. Connect each wire to its corresponding pipe by using the flare nuts. Before opening the gas valves, close the flare nuts tightly. Professional aircon installation in Singapore assures effective, quick, and hassle-free aircon installation services.

    ×